Summary of step 1 desired feature set:
1. stream live to internet
1a Existing live stream to You Tube is sufficient for now. We must solve the erratic upload problem now, before we move on. Retry this with internet box tied down and power lead secured.
This is exactly what I did! Figured it out before you posted it though.
NETWORK 1 SETUP (with internet connection)
Router 1 – default settings, DHCP ON
LAN 1 – Static IP 192.168.0.150 (I think you can use auto obtain IP), Default Gateway – 192.168.0.1, w/ DNS
NETWORK 2 SETUP
Router 2 – DHCP OFF
LAN 2 – Static IP 192.168.1.100 ; Default Gateway – Blank ; DNS – Blank
— * It will show as Unidentified Network on your adapter settings window.
I have internet on network 1 while I can file share on network 2 (no internet access) for work. 2 different networks, 1 pc
Why do we have to occasionally hard reset the internet box?
Heavy power switch. Where did the “power Conditioner” go?
Laptop boot on power, sleep on power down
2 allow real-time camera switching
2a – Implement camera feed switch.
2b – laptop to control switching interface
2c – Router from home to mount in 19 in. Rackd. – 2.d current inputs : 1 Sony camera remotely steered, 1 Sony camera fixed at sound booth.
3 use one remote camera and one fixed camera for now.
3a. – one remotely controlled camera
3b- Pan/tilt mechanism / controller done, needs tuning.
34c- zoom, focus etcetera.
3d-Evaluate lanc dongle. Buy. Camera XA35.
3e Camera drive. Lanc drive. add joystick or wheel to LANC zoom
4 Use mixed audio stream from existing sound board.
4A Why is the fan in the switch so loud?
4b. Key to switch / software /
4c – do we have audio coming in from Sound Booth Channel 8?
4d Get app to work on nexus tablet.
4e. Sound Board private network
Send use able stream of camera feed for ProPresenter to display on projectors. Use ProPresenter as a input “Camera” source to switch.
Is ther a way to with the exsisting video on the Lightening outputs
Initial video switcher setup
Initial video converter (red box ) set up
Control duc source , change to HDMI IN
Output 1080i, 59.94.
Control SDI OUT SOURCE. scale if other than I.
Wire run names
16wvdc motor all electronics
Here is the original BESCOR PanTilt Drive with a WII Nunchuck
Here is the Pan/Tilt with the pan motor tachometer installed
Herre is the initial LANC interface notes