No flap up light
Fault after attemp to move flaps
All posts by Todd's Time
FBC Justin baptistry hot water information
Hydro-Quip_HQ_Baptismal_Spec_Sheet
This one has only 1 air switch
Water valve info:
https://www.wildwestpoolsupplies.com/hydroquip-baptismal-auto-fill-kit-hydroquip-af2902-w-valve-assembly-only-48-0143/
Waterway products +15315719957
Water level
https://www.wildwestpoolsupplies.com/hydroquip-water-level-assembly-hydro-quip-bes-6000-48-0141c-k/?gclid=Cj0KCQjwk7ugBhDIARIsAGuvgPbgxSMjOmwgjtSywWL9DA4bl8aZwVnA9I1UcV53Rt79tydshj4DwYcaAmIPEALw_wcB
Controller only
https://spacare.com/InterfaceModuleForAutoFill_AutoDrain48-0042-K.aspx
How do i test CPDLC on the ground?
This from Duncan Intellegence:
ARINCDirect
4-letter test station IDs: ARDC and ARDD
Tech support: ADFANS@arinc.com
Phone: 410 266-2990
Satcom Direct
4-letter test station ID: WIFS. (Use WIFS1 as the flight ID or call sign)
Tech support: support@satcomdirect.com
Phone: 321 777-3236
Link to complete article by Mike Meyer. Hi Mike!
use a LED to test extremely small leakage on a cap
APS-80 out of trim when AP disconnect
GV fire loop
wire esw 1202-022-006. NEXANS company.
Red and white fire zone
Cover and protect elephant skin
https://surfaceliner.com/
Honeywell IRU fault
#1 position ONLY, with new HG2001GD40 gives a fault AFTER ” ON BATT”.
OLD HG2001GC02 will run fine.
IMT on the GD40 IN #1position is “DATA INVALID”.
Other 2 units are disgustingly normal.
https://youtube.com/shorts/pxopz7Y77Fs?feature=share
#1 parity pin 4c set to ground. All good now
https://youtube.com/shorts/2Hezva5NJ3I?feature=share
Little difference between units.
Tambour door repair
Just a little vacuum to keep the mat smooth.
What is that stuff i like so much?
Oh, Yea, FOOD
