Dassault F900 s/n 149 N924S
F900 s/n 149
ATG 2000 P/N P15864-002 S/N 1586400215168
CTR P/N 12083 S/N 1208313760
ACM P/N 14126 S/N 1412613966 S/N 1412612913
ATG Transceiver ID:
ATG Aircraft ID: new july 27 2015 904448 906279OLD
For quick reference, try: http://192.168.1.15:1000/mobile-portal/
Play Store link to the GoGo App
Apple Itunes link to the Gogo App.
Quick troubleshooting questions for pilots in-air:
What is the NAME OF THE NETWORK you are connected to?
Can you surf the internet?
Should be N124S_WIRELESS or somesuch. That’s GOOD
Can you see a wireless network called LINKSYS?……that’s bad.
How many devises are ON in the airplane?
Turn SIRI and IMESSAGE OFF.
Notes for troubleshooting on ground:
First of all….The WIFI SSID that shows up on the face of your phone MUST BE N924S_WIFI or somesuch. If the network shows up as LINKSYS on your Wireless on your phone>>>> Do not waste time troubleshooting the system. Any fix you implement now will soon be lost and you will be stuck in a endless circle. Order a CTR exchange and configure it correctly.
When you are ready to get into the system:
http://192.168.1.15:8080/maintenance/user
User: atguser PW letmein
Does the Aircraft ID come up in the upper right corner?
++++++++++++++++++++
CTR 192.168.1.1 USER admin P/W *aircell1*
CTR P/N P12083 s/n
++++++++++++++++++++++++++++++++++++++++++++++++++++
Hints and tricks about logging into the units:
ALWAYS ALWAYS ALWAYS ____Turn OFF_____ the wireless connection on you laptop before you attempt to connect to the WIRED connection on the ATG or CTR.
Try a connection with the wired connection.
If you have trouble hitting the units from the wired connection at the RH Drink rail:
If you have trouble connecting to the units:
TURN OFF THE WIRELESS ON YOUR LAPTOP.
May have to set a HARD IP in your laptop. Try setting up a laptop with a Static IP address of 192.168.1.50 for the LAN connection. This will be required if there is a problem with the ATG….beccause the ATG ____ONLY____ provides DHCP services to other devises on the network.
!!!!!!!!!!!!___DO NOT ALLOW the CTR to provide DHCP services___
REMEMBER: If you do set the laptop to STATIC IP, you will not be able to use the laptop as a normal user on the network.
After a reboot, the ATG takes 7 minutes to come up. During that time you will have no DHCP Services on the network. So a STATIC IP connection will come up fine, but a DHCP request connection will take the full 7 minutes or more…..frustrating.
LiscenceKey or TextandTalk
Weak frout ant case 59438 Bob ross