G100 squawks

 

 

1 each grey wick failed, Dayton pn dg16785, model 51cd2a

Rh winglet angled wick failed. no p/n

Damage at RH stab tip. Bonging Foil peeled up.

One black wick failed.   HR SMITH PN10-900-25

RH elevator bonding over 3 ohms.  Clean bonding straps.

Lubricate pilot and copilot stow-able arm rests.

Fwd rh galley, one drawer does not latch.

FSB/NS CB pops. Done

FIRE TEST erratic, sometimes only some lights will test. Failed test sw p/n 25W847009….. 9 is obscure.  video

https://youtube.com/shorts/Fy3L2XfmvWo?si=h9YSwtJY1g_Bx4-q

 

Bolt stripped at lower left APU REGULATOR computer mount.   Needs a new floater

Entertainment inop.  No wire diagrams at all.   None! Not any !   402 479 4221 ex.   Mellisa.

https://www.manualslib.com/manual/3049710/Flight-Display-Systems-Fd200cpu-7.html?page=12#manual

MASTER CAUTION , no DIM mode, task 311220

FMS displays FAA n number on powwr up.  Configured #1 and #2 FMS to display current aircraft registration at power up.

Passenger monitor droops 5 degrees in extended position.

Rubber trim channel at edges of peistal dis-bonded.  Remove, clean old glue, reapply.

 

Plastic catch-all aft of pedistal broken, trim disbonded.