SN 91 Falcon 20C and SN 408 F20-5 had Universal EICAS installed in the middle.
Fancy
How does the AOA get into the EFIS?
The comparitor circuit exists in both DPU and the MPU.
They communicate about errors
Falcon 50 EFIS 86 comparator and heading
The neoprene is so gentle, it will not touch the anodize on the rivet heads. Does not affect paint.
Without sb 329
Lw 7036 lbs
Rw 7080 lbs
Center 6884 lbs, you cannot jamb the center all the way full until the wing are End-of-fueling.
With sb 329
Lw 7006 lbs
Rw 7050 lbs
EFIS-86A
EFIS-86C
In a falcon 50, or 200 used DPU-86C
622-7248-001, or -002 after mod
Manual for EFIS-86(1) is
EFIS-86(3) or (13) usses DPU-86L
EFIS-86 (4) or (14) uses DPU MPU86R
In a low SN 50
622-9009-001 or -002 after mod. Is this what gives names on waypoints on MFD?
EFIS-86E
Possible manual
https://gsplanestuff.com/products/collins-efis-86c1-install-manual-using-dpu-86c-mpu-86c
Possible manual
https://www.ebay.com/itm/183819877377?hash=item2acc84bc01:g:43YAAOSwLGVc5DJM#shpCntId
https://www.digikey.com/en/htmldatasheets/production/1065827/0/0/1/za016ldct.html?site=US&lang=en&cur=USD