http://www.herberaircraft.com/prod_hoses.htm

http://www.hydraquip-csi.com/hose_fitting.html?gclid=CKq6nsbNwacCFYdg2godtH4lAg

http://www.specialtyhose.com/hoses.htm

Every MPI or as required for Corrosive Environment.

Block the bleed air ports

grainger

Cardboard Roll

Paper roll

The function of the number 2 LO FUEL light depends upon the position of the #2 Boost pump switch.

Who Knew?

Here is a smple of a Citation III diagram:

Notice that the transorb is ACROSS the coil of the solenoid.

Note that the thermostat switch controls the coil.

There are two keys to understanding what the transorb does.

1. The transorb is wired across the coil of the air solenoid. It slows the Field Collapse when the thermostat opens.

2. The propose of the transorb is to protect the THERMOSTAT SWITCH.

http://labjack.com/u3

Here is a 2008 list

10080400

J5 or J6 on the CDBR-2 to connect to the iBOB unit

Don’t order this backshell, It is for a different style plug, does not fit the 26 pin HD.

This guy has a clue. http://secure.afa.net/afa/activism/takeaction.asp?id=384