All posts by Todd's Time

Uncategorized

Down and dirty Hydraulic service fixtures

 

Terry built these up for the shop.

This is the single action hand pump, low volume.

https://www.surpluscenter.com/Hydraulics/Hydraulic-Pumps/Hand-Pumps/1-5-cu-in-SA-Hand-Pump-Head-Wolverine-by-Prince-Mfg-WHP-15-SA-9-8436-15.axd

 

over a gallon resevoir

 

https://www.surpluscenter.com/Hydraulics/Hydraulic-Pumps/Hand-Pumps/300-cu-in-Steel-Tank-Hand-Pumps-Wolverine-by-Prince-Mfg-WHPT300-9-8438-300.axd

or a 1 qt pump item Number: 9-8438-60

all built up already.

 

https://www.surpluscenter.com/Hydraulics/Hydraulic-Pumps/Hand-Pumps/Hydraulic-Hand-Pump-1-2-Gallon-Tank-Prince-PM-HP-5B-9-5201.axd

royal hose north I35
Address: 1700 Lacy Dr, Fort Worth, TX 76177
Phone: (817) 626-2226

also, here is a brake bleeder with a air compressor, you have to be careful to unplug it, so it does not overpressure.  Could use a 45 PSI cutoff sw
bleeder end fitting from aircraft spruce
AircraftTroubleshooting, F50 Troubleshooting

Which EFIS-86 is which?

 

 

EFIS-86A

 

 

EFIS-86C

In a  falcon 50, or 200 used DPU-86C

622-7248-001, or -002 after mod

Manual for EFIS-86(1) is

EFIS-86(3) or (13) usses DPU-86L

EFIS-86 (4) or (14) uses DPU MPU86R

In a low SN 50

622-9009-001 or -002 after mod. Is this what gives names on waypoints on MFD?

 

EFIS-86E

 

 

Possible manual

https://gsplanestuff.com/products/collins-efis-86c1-install-manual-using-dpu-86c-mpu-86c

 

Possible manual

https://www.ebay.com/itm/183819877377?hash=item2acc84bc01:g:43YAAOSwLGVc5DJM#shpCntId