Freon service hosekit to scavenge the nice end fittings. Each kit offers 6 fittings, so order 2 kits and you will have plenty. They have a nice soft flare seal that is replaceable. Destroy the end crimp. Purchase 3/16 soft rubber service line. Cut to length and have a hose shop crimp new brass sleeves.
You need to end up with at least:
1 Static Hose, 30 Ft with a T, two 10 foot hoses. Long enough to wrap around the fuselage to reach the static ports.
1 pitot hose, 30 Ft with a T, at least a 6 foot on the end. Long enough to reach to each pitot tube.
This does not speak to the airplanes that will need to have the Pilot, AND copilot AND Standby Pitot/Static to be run simultaneously Two more t’s and 4 short hoses required for that.
Freon hoses from :
http://www.r22.org/prod_list.php?sci=30
“CoolGas on the invoice
3/16ths hose and crimp service from:
Kims Hose & Fittings Inc
maps.google.com
2605 White Settlement Road
Fort Worth, TX 76107-1329
(817) 332-8953
++
Here is the the Pitot adapter turned down from a brass fitting. Use normal Vinyl tubing with Worm clamps to slip onto the Pitot tube.
Here is a angled end fitting with dust cap and lanyard made from a Shark Leader
Shark leader and crimper:
Dust caps are just plugs
++++++++++++++++++++++++++++++++++++++++++
Here is the NavAids Canada Adapters:
http://www.navaidsltd.net/Brochure-2006-1.html
Aircraft Ground Support Equipment
Aircraft: Falcon 900
Category: Commuter & Corporate
___________________________________________________________________________________________
Pitot Test Adaptor : P55517M1-3
Pitot Probe Part No. : 50520
Static Test Adaptor : SS44111P-60 – 4
Blanking Adaptor : SS44111PB-60*
Misc Adaptors : 21298L-225-4 / 21298LB-225* Standby Static
Pitot Pre-Test Probe : PT15551
Air Data Accessories Kit : ADAF592-723
Air Data Accessories Kit RVSM : ADAF592-945
Pitot Cover : PC555-17SB
Seal Kit : SK517
Seal and Spacer Kit : SSK517
Lubricating Fluid : LF5050
Pump outer square seal id 1.372 od 1.61 thick 1.31
Pump lip seal od 1.282. Id .25 shaft.
