Category Archives: tECHNOLOGY

tECHNOLOGY

Champ Camera

The great Robby Rhoades referes to this a s a checkup cam.

 

That way you can check up on yourself and see if you are having enough fun.

 

 

Early Camera Pan2

Audi is still picking up remote mic and internal mic.  Ill try to open the camera and remove the internal mic, and  solder a 1000 ohm resistor across the pads

 

 

 

tECHNOLOGY

HeffTemp

 

 

 

 

time.setup(-5,0)

del1=0

low1=50

textbox timep
print “AIR CONDITION TEMPERATURE ANALYSIS”

print “RETURN VENT TEMPERATURE ”
textbox in1
print “OUTPUT VENT TEMPERATURE ”
textbox out1
print “LOWEST TEMP OF THE DAY”
textbox deltemp

print

print “Max delta temp”
print
print “NOTE: 10 11, OR 12 IS GOOD, BELOW 9 IS FAILING”
textbox low1

print

‘setup a stop button to quit the program
Button “stop the program”, [fin]
timer 1000, [chkstat]

Wait

[chkstat]

timep=time(“month-day hour-min”)

in1=temp(“285e03e612190128”)
out1=temp(“28b848dc12190179”)

deltemp=in1-out1
if deltemp>30 then deltemp=0
if deltemp>del1 then del1=deltemp

if out1<5 then out1=50
if out1<low1 then low1=out1

if time(“hour-min”)==”22-00″ then
del1=0
low1=50
delay 60000
endif

wait

[fin]

end

 

Good Aorcondition thermostat wiring vodeo

 

 

 

 

tECHNOLOGY

PCB production

After making hundreds of boards with PCB Express…. we grew out of them. They offer a very easy to use interface, walled garden approach. expensive boards.  Something like 5 x the industry average.

 

I finally found EasyEDA.  It is simple enough for my pea brain to operate.  Lots of libraries built in.  3D view. Direct to JLCPCB to fab  boards.

 

 

We shall see how the quality works out.

 

Good EASYEDA component build video